PhD report (January 2013) K.Kubok
Saturday, 9 February, 2013, 15:25 Posted by Katarzyna Kubok
My activities in January: I wrote the article entitled: "Age hardening of Mg-3Zn-xCa (x = 0, 0.5, 1.0 ) wt.% alloys” which was sent to Materials Science Forum.The article was prepared fot the 6th International Light Metal Technology Conference organised by Specialist Research Institute of Brunel University. Here you can read abstract: "Alloys of nominal composition Mg-3Zn-xCa (x = 0, 0.5, 1.0) wt.% were prepared by resistance melting and casting under the protective argon atmosphere. All specimens were examined by hardness test during ageing at 175 °C. It was shown that calcium addition causes the increase in hardness. A detailed characteristic of microstructure of metastable phases has been carried out using transmission electron microscopy (TEM). Calcium addition resulted in much refined and more homogeneous distribution of the precipitates when compared with the binary Mg-3%Zn alloy. The age-hardening of ternary alloy is attributed to the fine disc-shape plates lying on the basal plane of the matrix."
Thursday, 7 February, 2013, 16:46 Posted by Jakub Kawalko
In January I have participated in SEM training course that have been organized in our Institute for interested young scientists and PhD students. During the training we used Institute Philips Electron Optics XL30 Scanning Electron Microscope equipped with LINK ISIS Energy Dispersive Spectrometer from Oxford Instrument. Training consisted of five meetings each lasting between two to four hours. During its course we have learned basic techniques required for sample observations in secondary and backscattered electrons. Additional training was given for X-ray chemical microanalysis for both standard-less and standard quantitative analysis, as well as chemical mapping. Apart from training I have conducted mechanical tests on grade 2 and grade 4 titanium before (tensile tests + hardness) and after (hardness) KoBo extrusion. Additionally first samples of titanium treated by electroerosion cutting have been prepared and inspected by means of scanning electron microscope.
PhD report (January 2013) K. Stan
Thursday, 7 February, 2013, 02:47 Posted by Katarzyna Stan
Main studies carried out during the month: - investigation of melt spun ribbons with hafnium addition (including microhardness measurements and microstructure analysis using SEM and TEM) - investigation of melt spun ribbons with tungsten addition (TEM) - preparation of an article for the AMT conference - some trials on application of thermomechanical analysis to ribbons investigations (to determine linear thermal expansion coefficient of melt spun ribbons and their young modulus depending on temperature)
PhD report (January 2013) J.Poplewska
Wednesday, 6 February, 2013, 12:01 Posted by Jagoda Poplewska
This month I was preparing to the exam of French and I made some literature review (continued study).
PhD report (January 2013) M. Gajewska
Tuesday, 5 February, 2013, 15:53 Posted by Marta Gajewska
Last month I’ve made a second attempt towards in situ formation of AlN reinforcement in aluminium matrix. The experiment involved melting of aluminium in Balzers type induction furnace, and then, after removal of surface oxide layer, introduction of nitrogen-bearing substrate (in form of a green compact) to the metallic melt. Unfortunately, apart from eddy currents, there was no possibility of mixing the melt, which was the reason why the substrates remained on the surface of aluminium. As a result, aluminium nitride was found only in the surface layer of the material.
<<First <Back | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | Next> Last>> |